Reduction And Enlargement Capabilities At Your Point
Of Need
The full-featured performance of the Xerox 3060 brings design
drafting and production printing to your point-of-need. High-quality
copies do more than look good. They enable error-free communications. By
delivering crisp, clean copies, the Xerox 3060 Engineering Copier can
enhance your communications. But it also does a lot more. The 3060
offers a zoom optical system with a range of 45 to 200 percent that can
be positioned in 0.5 percent increments, allowing you to reduce or
enlarge your documents to the exact size and scale you need.
The Full-Featured Performance Of The
Xerox 3060 Brings Design Drafting And Production Printing To Your
Point-Of-Need.
High-quality copies do more than look good. They enable
error-free communications. By delivering crisp, clean copies, the Xerox
3060 Engineering Copier can enhance your communications. But it also
does a lot more. The 3060 offers a zoom optical system with a range of
45 to 200 percent that can be positioned in 0.5 percent increments,
allowing you to reduce or enlarge your documents to the exact size and
scale you need.
That means you can present your proposal, bid or quotation documents,
including relevant drawings, in a neat set by reducing or enlarging them
to a single, uniform, easy-to-handle size. Not only will the sets look
better, but they'll probably cost less in media and postage. And you can
easily add graphic impact to your presentations by enlarging key
drawings and information onto flip-chart size pages.
Your only as good as your information
Like all Xerox engineering copiers, the 3060 copies onto plain
paper, vellum and film. Plus, thanks to the density and contrast
functions, you have control over the final output. It even makes quality
copies from opaque, translucent, 3mm board, pasteups and Diazo blueline
prints - to any manageable length. And it lets you improve the quality
of faded or torn documents.
Protect your investment
Document maintenance - preserving your investment in engineering
information - is a key component of the 3060 productivity story. Think
of the value in time, expertise and expense that your drawings
represent. With its ability to produce high-quality copies from
poor-quality originals, the 3060 can save you time and money in
restoration, manual tracing or redrawing. Elements from old drawings can
be reused via Reprographic Drafting techniques. The 3060 can even save
you disk storage space by cleaning up old originals before scanning.
A size that makes sense
The 3060 is designed to make the best use of your resources. Its
small footprint gives you flexibility in the use of your facility space.
The on-board Auditron tracks media usage by job and/or account (e.g.,
number of square feet of vellum used in a specific project) to give you
greater accountability and control over your project documentation
costs. Reducing the size of drawings for distribution can add up to
significant savings in media and postage costs over time. It features
very low power usage in rest and power-saver modes to reduce your
electricity costs (116 watts/hr. in rest mode; 162 watts/hr. in power
saver mode).
The Xerox 3060 Engineering Copier gives you an
impressive array of plain-paper productivity benefits. And with its
small footprint, attractive appearance and easy operation, you can put
all the reprographic capabilities you need, including reduction and
enlargement, right where you really need them - hallways, departments,
remote sites and any other point-of-need environments. Most important,
it allows you to make better use of your two most valuable assets - your
time and your information.
The Xerox 3060. It's more than an engineering copier.
It's a productivity tool.
The right size. The right capabilities. The right
value.
The engineering drawing is a container of thought and a catalyst for
innovation. It's a tool of enormous power. You don't want anything
holding that power back.
That's why we made the Xerox 3060 Engineering Copier.
The 3060 keeps your vital engineering information flowing smoothly. It
has three rolls of easily selected media on-board with automatic
switchover to the next available roll. You can take advantage of its
versatility in regard to input and output media (it copies from almost
any material onto bond, vellum or film), or enjoy uninterrupted
operation during long runs on the same media. And whenever the job calls
for non-standard media, simply use the manual bypass. |
You also get the plain-paper advantage with the Xerox
3060. It's a clean process. Valuable documents won't deteriorate or fade
over time. And they won't have to be reinvented when it's time to update
a product or revise a design. Drawing elements can be rescaled and then
cut-and-taped to form a new concept drawing. Drawings blown
back from aperture cards can be scaled to any size for updates and
revisions.
You can save time and media costs by reducing E- and
D-size documents to a more manageable C- or B-size
for distribution. Simply program the reduction and enlargement preset
buttons for these standard reductions.
The 3060 helps you reduce document production time
because it delivers copy speeds of three E-size, six
D-size and eight C-size copies per minute and up to
15 copies from a single document.
Protect your investment
Document maintenance - preserving your investment in engineering
information - is a key component of the 3060 productivity story. Think
of the value in time, expertise and expense that your drawings
represent. With its ability to produce high-quality copies from
poor-quality originals, the 3060 can save you time and money in
restoration, manual tracing or redrawing. Elements from old drawings can
be reused via Reprographic Drafting techniques. The 3060 can even save
you disk storage space by cleaning up old originals before scanning.
Key features
-
Ease Of Installation And Operation
-
Compact footprint (57 inches wide by 36 inches deep)
115 VAC/20 amp power
-
Swivel-mounted control panel with easy-to-understand
dual-language message display and straightforward user interface
graphics
-
On-board electronic Auditron with 250-account
capacity lets you track usage by specific job or project
-
Attractive appearance and quiet operation
Throughput
-
Presentation-quality engineering copies on plain
paper as small as 8 1/2 inches by 11 inches, up to 36 inches by any
manageable length
-
Up to 15 copies from a single original up to 36
inches by 60 inches
-
Rated operating speed of eight C-size, six D-size or
three E-size copies per minute
-
Three-roll (500 feet each) media supply with
automatic switchover to next available roll for fewer interruptions
and increased productivity, especially during large jobs when total
copying capacity can run to 4,500 square feet without interruption
Versatility
- Input documents - original drawings, bluelines, sepias and
fragile documents such as cut-and-paste composites on opaque and
translucent media, up to one-eighth inch thick
- Output media - bond, vellum or film - manual bypass feature for
special media requirements such as colored paper for presentations
- Partial copy feature saves time and media when you need only a
portion of the document copied
Additional features
-
Zoom optical system. Select reduction or enlargement
at any point between 45% and 200% in 0.5% increments. Five customer
setable presets also available.
-
Auto media switch automatically feeds media from the
next available roll when the roll in use has been depleted
-
On-board electronic Auditron with capacity for 250
individual accounts in three modes: access control, assigned
account, copy inhibit
-
Interactive dual-language message display
communicates the status of the copier and displays instructions for
operation and maintenance
-
Three on-line media feed rolls, each with 36" x 500'
capacity for bond and vellum (36" x 150' for .004 drafting film)
Accessories
Agency approvals
Click here for specifications |
